AJA IO-IP Professional HD Video and Audio I/O Over IP for Thunderbolt 3 + PSU

Description

AJA Io IP Professional Video and Audio I/O over IP for Thunderbolt Powered SDI and HDMI Output 4K/UltraHD
Professionally pulled from a working environment. Includes power adapter. May show signs of previous ownership including light surface scratches, scuff marks and wear along the edges from normal use and storage.
Video Formats
(4K)** 4096 x 2160p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
(UltraHD)** 3840 x 2160p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
(2K) 2048 x 1080p 23.98, 24, 25, 29.97, 30, 50*, 59.94*, 60*
(2K) 2048 x 1080PsF 23.98, 24, 25
(HD) 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
(HD) 1080PsF 23.98, 24, 25, 29.97, 30
(HD) 1080i 50, 59.94, 60
(HD) 720p 50, 59.94, 60
(SD) 625i 50
(SD) 525i 59.94
*SMPTE ST 2110 only
**2SI over IP via ST 2110-23 only
Note
: High Frame Rate capabilities are dependent on host system attributes. Not all systems and configurations will support all frame rates.
Media Transport Interfaces
SMPTE ST 2110 (-10, -20, -21, -23, -30, -40), 2022-6, 2022-7
·
2x SFP+ Cages - SFPs not included
Recommended 10 GigE SFP+ modules:
·
Arista Networks SFP-10G-SR Compatible 10GBASE-SR
·
Fiberstore SFP-10GSR-85 10G SFP+ 850nm
·
Finisar FTLX1471D3BCL (for single mode 1310nm)
·
Mellanox MFM1T02A-SR 850nm 10G
Video Input IP
SMPTE ST 2110, 2022-6, 2022-7
·
Single channel* input available when using ST 2110 or ST 2022-6 to receive 2K/HD
·
4-Channels input available when using ST 2110-23 to receive 4K/HD
·
ANC support
·
Rx support for Narrow Senders**
*Capture and simultaneous monitoring is supported up to 2K/HD
**SMPTE ST 2110 only
Video Output IP
SMPTE ST 2110, 2022-6, 2022-7
·
Single channel* output available when using ST 2110 or ST 2022-6 to transmit 2K/HD
·
4-Channels output available when using ST 2110-23 to transmit 4K/HD
·
ANC support
·
Tx support for Narrow Receivers**
*Capture and simultaneous monitoring is supported up to 2K/HD
**SMPTE ST 2110 only
Video Output Digital
3G-SDI, SMPTE 425
·
RGB 4:4:4 12-bit*, YCbCr 4:2:2 10-bit
·
2K/HD downsample available when working with 4K/UltraHD via ST 2110-23
1.5G-SDI, SMPTE 292M
·
Single Link HD-SDI YCbCr 4:2:2 10-bit
·
Dual Link RGB 4:4:4 12-bit*, Dual Link YCbCr 4:2:2 10-bit
270 Mbps SDI, SMPTE 259M-C
·
YCbCr 4:2:2 10-bit, 8-bit
HDMI v2.0
·
30/36-bits/pixel, RGB or YUV, 6 Gbps per color component
·
4K/UltraHD, 2K/HD and SD
·
2K/HD downsample available when working with 4K/UltraHD via ST 2110-23
*Bit depth support is application dependent. Check with your software manufacturer for compatibility.
HDR
SDI: VPID signaling for SDR/HDR Transfer Characteristics, Colorimetry and Luminance
HDMI: HDR10 Support - HDR Infoframe metadata, compatible with HDMI 2.0a/CTA-861.3
HDMI: HLG Support - compatible with HDMI 2.0b/CTA-861-G
Note:
HDR support is application dependent. Check with your software manufacturer for compatibility.
Audio Input IP
Up to 16-channel embedded audio, 24-bit per channel, 48 kHz synchronous
Audio Inputs Analog
8-channel, 24 and 16-bit A/D analog audio, 48 kHz sample rate, balanced, using industry standard 8x XLR on DB-25 breakout cable (cable not included)
+24 dBu full scale digital (0 dBFS)
+/- 0.2 dB 20 to 20 kHz frequency response
Input supported across Ch 1-8, Ch 1-4, or Ch 5-8 depending on the chosen configuration
Audio Output IP
Up to 16-channel embedded audio, 24-bit per channel, 48 kHz synchronous
Audio Output Digital
16-channel, 24-bit SDI embedded audio, 48 kHz sample rate, synchronous
8-channel HDMI embedded audio, 48 kHz sample rate, synchronous
Audio Outputs Analog
8-channel, 24-bit D/A analog audio, 48 kHz sample rate, balanced, using industry standard 8x XLR on DB-25 breakout cable (cable not included)
+24 dBu full scale digital (0 dBFS)
+/- 0.2 dB 20 to 20 kHz frequency response
Output supported across Ch 1-8, Ch 1-4, or Ch 5-8 depending on the chosen configuration
Downstream Keyer
Supports graphics up to 2K/HD with alpha channel over video, matte or framebuffer, or framebuffer content over incoming video or matte
Reference and LTC I/O
1x BNC assignable to Reference video or LTC input
Reference
Analog Color Black (1V) or Composite Sync (2 or 4V) or HD Tri-Level Sync (1V)
Reference input is terminated into 75 ohms when Genlock is set to Ref In
Applicable in SMPTE ST 2022-6/7 environments
Discovery, Registration and Control
NMOS Tx/Rx support for SMPTE ST 2110 according to standards IS-04 v1.3 and IS-05 v1.1
·
Applicable in SMPTE ST 2110 environments
LLDP
IP Clock
PTP support compliant with PTP PTPv2 / IEEE 1588-2008
Applicable in SMPTE ST 2110 environments
Electrical Interface
Thunderbolt 3 (2x)
Size (w x d x h)
8.74” x 8.11” x 1.65” (222.0 x 206.0 x 41.91 mm)
Weight
3.3 lbs (1.5 kg)
Power (Device Only)
10-20V, 33W typical, 38W max, 72W max with USB-C power delivery to external devices
Environment
Safe Operating Temperature Range: 0 to 40 C (32 F to 104 F)
Safe Storage Temperature (Power OFF): -40 to 60 C (-40 to 140 F)
Operating Relative Humidity: 10-90% noncondensing
Operating Altitude: <3,000 meters (<10,000 feet)